In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day.

Remove the Drain Pan

To start, make sure the main power switch is in the ON position. Open the door, lift-up on the drain pan stop and pull out the drain pan assembly, using the handle on the drain pan.

Cleaning the Crumb Basket

Next, lift the pan cover from the drain pan. Then lift the crumb basket from the drain pan and wipe the oil and crumbs from the crumb basket. Clean the crumb basket with soap and water, then thoroughly rinse with hot water.

Accessing the Filter Pad

Remove the filter pad retaining ring and clean thoroughly with soap and water. Be sure to rinse it thoroughly with hot water. Pull the filter pad from the pan and discard it.

NOTE: If your facility runs 24 hours a day, the daily tasks need to be done twice a day.

Cleaning the Screen

Remove the bottom screen from pan and clean it with soap and water. After, rinse the screen thoroughly with hot water. Next, wipe any oil and crumbs from the drain pan and clean it with soap and water. Rinse the pan thoroughly with hot water.

Drain Pan Reassembly

Once you are finished cleaning, reassemble the components in reverse order, placing the bottom screen into the filter pan first, followed by the filter pad, retaining ring, and the crumb catcher. Push the filter pan assembly back underneath the fryer, making sure the filter tube on the pan makes a good connection with the fitting underneath the fryer. Make sure the drain pan stop is engaged and the fryer is now ready for normal operation.

To learn more, subscribe to the Ignitor Labs Membership to check out our full Interactive Training Course on the Henny Penny Evolution Elite fryers.

In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day.

Remove the Drain Pan

To start, make sure the main power switch is in the ON position. Open the door, lift-up on the drain pan stop and pull out the drain pan assembly, using the handle on the drain pan.

Cleaning the Crumb Basket

Next, lift the pan cover from the drain pan. Then lift the crumb basket from the drain pan and wipe the oil and crumbs from the crumb basket. Clean the crumb basket with soap and water, then thoroughly rinse with hot water.

Accessing the Filter Pad

Remove the filter pad retaining ring and clean thoroughly with soap and water. Be sure to rinse it thoroughly with hot water. Pull the filter pad from the pan and discard it.

NOTE: If your facility runs 24 hours a day, the daily tasks need to be done twice a day.

Cleaning the Screen

Remove the bottom screen from pan and clean it with soap and water. After, rinse the screen thoroughly with hot water. Next, wipe any oil and crumbs from the drain pan and clean it with soap and water. Rinse the pan thoroughly with hot water.

Drain Pan Reassembly

Once you are finished cleaning, reassemble the components in reverse order, placing the bottom screen into the filter pan first, followed by the filter pad, retaining ring, and the crumb catcher. Push the filter pan assembly back underneath the fryer, making sure the filter tube on the pan makes a good connection with the fitting underneath the fryer. Make sure the drain pan stop is engaged and the fryer is now ready for normal operation.

To learn more, subscribe to the Ignitor Labs Membership to check out our full Interactive Training Course on the Henny Penny Evolution Elite fryers.