by Peter Laganowski | Mar 3, 2020 | Grills, Troubleshooting
What is the Linear Actuator? The linear actuator is the component that moves the platen upward and downward. It converts the rotary motion of a motor to straight line movement by way of gears and screw threads. How Does the Linear Actuator Work? Its motor is...
by Peter Laganowski | Feb 13, 2020 | Fryers, Troubleshooting
What Is an Ignition Issue? Ignition Failure occurs when the ignition module fails to sense a flame within 4 seconds of the “call for heat” signal and locks out. When this happens, the Module will send a 24 VAC signal through the Interface Board’s alarm circuit to the...
by Peter Laganowski | Jan 14, 2020 | Ice Machine, Troubleshooting
What’s the Problem? The unit is not producing ice. How do I troubleshoot the issue? Prior to troubleshooting check for electrical issues affecting the unit. Identify if the power supply is off or not within specifications, or if the ice machine’s switch box fuse is...
by Peter Laganowski | Dec 16, 2019 | Oven, Troubleshooting
Issue: The oven does not heat up, even though the screen says it is warming. Step 1: If the oven is not heating, check to make sure the oven is not running demo firmware. If DEMO software is detected, load the current software to erase and replace the DEMO version....
by Peter Laganowski | Dec 3, 2019 | Grills, Troubleshooting
If there is a gas-related issue, follow these steps. Step 1: Perform a gas pressure check. Ensure the gas type, incoming pressure, and the gas pressure (after valve) is correct for the left, center, and right sides. See the rating plate for details. Perform the gas...
by Peter Laganowski | Nov 5, 2019 | Coffee Brewer, Troubleshooting
What’s happening? Power is supplied to the unit, but the water does not heat. Follow these steps to troubleshoot the issue. Step 1: First, check the fuse (if present) and verify that it has not blown. If the fuse is bad, replace it. If the fuse is in good...
