by Peter Laganowski | Feb 13, 2020 | Fryers, Troubleshooting
What Is an Ignition Issue? Ignition Failure occurs when the ignition module fails to sense a flame within 4 seconds of the “call for heat” signal and locks out. When this happens, the Module will send a 24 VAC signal through the Interface Board’s alarm circuit to the...
by Peter Laganowski | Nov 5, 2019 | Fryers, Preventative Maintenance & Cleaning
In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day. Remove the Drain Pan To start, make sure the main power switch is in the ON position. Open the door, lift-up on the drain pan stop and pull out the...